750 kVA Transformer for Industrial Power
Need stable, high-capacity power for industrial equipment or energy systems?
Shinenergy’s 750 kVA three-phase transformer is built for heavy loads, long hours, and complex site demands—ideal for factories, data centers, and utility connections.
We offer step-up or dry-type models, support voltages like 480V/208V, 400V/11kV, and 600V/240V, with copper or aluminum windings, insulation up to Class H, and IP54 protection. Every unit is fully load-tested, UL/CE certified, and ready for integration.
📩 Send your specs—we’ll size the unit, check impedance, and quote fast based on your delivery terms.
Spain – Ground-Mounted PV Powers Factory Operations
A dry-type 750 kVA transformer connects solar output to a 20kV internal grid.
In Valencia, an agri-processing facility installed a ground-mounted PV system next to its main plant to cut daytime energy costs. They needed a 750 kVA dry-type step-up transformer to raise inverter output from 400V to 20kV, feeding directly into their internal MV distribution system.
Due to flammable materials nearby, oil-filled units were ruled out early. We supplied a Class H, VPI-insulated dry transformer with IP23 protection, engineered for high ambient temperatures.
“It was the only part of the PV system we didn’t have to rework.”
USA – PCS Skid Integration for a Modular BESS Project
Handling 480V to 12.47kV transitions in a fast-cycle energy storage system.
In New Mexico, a commercial BESS integrator needed 750 kVA dry-type transformers to link PCS outputs at 480V to the 12.47 kV grid. The units had to fit inside sealed containers, withstand frequent cycling, and meet UL requirements.
We delivered low-profile, copper-wound units with Class H insulation and full factory testing.
“Other vendors offered standard models. You actually asked how we were installing it.”
Canada – Quiet, Cool Power for a New UPS Hall
A 750 kVA dry transformer supports low-voltage isolation in a Tier III data center.
Near Toronto, a data center expansion required a 750 kVA transformer to power a new UPS-backed switchboard. Their priority was a unit that ran cooler and quieter than the one they replaced.
We supplied a 600V to 208V dry-type transformer, sealed and dust-protected, designed with low partial discharge and optimized cooling paths.
“This one runs cooler than anything else we’ve bought.”
France – Safe, Oil-Free Power for a Hydrogen Balance-of-Plant Zone
Supplying compressors and controls with a dry-type transformer in a wind-to-H₂ pilot site.
At a pilot green hydrogen site in Brittany, one 750 kVA transformer supplied power not to the electrolyzer, but to essential balance-of-plant loads: compressors, cooling units, and PLC systems.
Installed in a container near hydrogen equipment, the transformer had to be oil-free and fire-safe. We provided a 415V isolation transformer, VPI-treated, with thermal sensors and full CE documentation.
Safety-first clients won’t accept compromise. This unit made approval easy.
UK – Clean Power for Hospital Diagnostic Expansion
A sealed transformer delivers stable voltage below critical care spaces.
In Leeds, a hospital expanded its diagnostics wing and needed a 750 kVA dry-type transformer to supply imaging systems, labs, and cleanrooms.
The unit stepped down from 11kV to 415V, operating beneath patient-care zones. The hospital requested low-noise, oil-free operation, with full CE/UKCA compliance and documentation ready for inspection.
“Your transformer was the only part of the job we didn’t have to chase.”
- Data Sheet
- kVA Transformer Catalog
- Shinenergy Product Catalog
| Certification | UL |
| Phase | Three Phase |
| Rated capacity | UP TO 3000KVA Customized |
| Frequency | 50/60Hz |
| Work Efficiency | UP TO 99.05% |
| Protection Class | IP00/IP20/IP23/IP40/IP44/IP54 |
| Winding Material | Copper or Aluminum |
| Insulation level | Class F (155°C) Class H (180°C) Class N (200°C) Class R (220°C) |
| Designed lifetime | ≥30 years |
| Cooling Method | Air Cooling |
| Wiring Configuration | Δ-Y (Delta-Star)/Y-Y (Star-Star)/Δ-Δ (Delta-Delta)/Y-Δ (Star-Delta) /Δ-Z (Delta-Zigzag)/ Y-Z (Star-Zigzag) |
| Noise | ≤35 dB (1 meter) |
| kVA Transformer Catalog | |
| 15kva 3 phase transformer | 20kva transformer 3 phase |
| Three Phase 15 kva transformer | 25kva single phase transformer |
| Three Phase 30kva transformer | 45kva 3 phase transformer |
| Three Phase 50kva transformer | Three Phase 60kva transformer |
| Three Phase 75 kva transformer | 100 kva transformer 3 phase |
| Three Phase 112.5 kva transformer 480 208 | Three Phase 150 kva transformer 480 208 |
| 167 kva single phase transformer | Three Phase 200kva transformer |
| Three Phase 225 kva transformer | Three Phase 300 kva transformer |
| Three Phase 500 kva transformer | Three Phase 750 kva transformer |
| Three Phase 1000 kva transformer | |
Shinenergy 750 kVA Three Phase Transformer – Built with Precision, Backed by Support
When you’re sourcing a 750 kVA transformer, you want answers fast, specs that make sense, and a build that lasts. That’s where Shinenergy delivers.
We manufacture both 750 kVA 3 phase dry type transformers and pad mounted units, built to meet exact specifications, tested under full load, and shipped with complete data—dimensions, weight, impedance, current rating, and more. Need to confirm secondary amps or check pad mounted transformer dimensions before install? We get it to you same day.
From cost of 750 kVA transformers to regional pricing—whether you’re asking for transformador de 750 kVA precio, transformer 750 kVA price, or just want a clean quote—we keep it clear and fast.
You’ll find Shinenergy listed among trusted 750 kVA transformer manufacturers, but we don’t just build—we support. Tech docs, drawings, export docs, no delays.
Your project’s ready when your transformer is. We make sure of that.
A 750 kVA transformer is designed for medium to large industrial loads, commercial buildings, BESS systems, and public infrastructure. It’s especially common in power distribution where three-phase voltage stability is key.
Most buyers are EPC contractors, plant operators, or electrical engineers looking for 750 kVA transformer manufacturers who can offer dry type, pad-mounted, or custom units based on voltage, impedance, and certification requirements.
Standard 750 kVA transformer specifications include:
Three phase
50/60 Hz frequency
Voltage options like 600V, 480V, 400V, or 208V
Efficiency in line with DOE or IEC requirements
As for size, a 750 kVA dry type transformer may measure roughly 1400 x 1000 x 1500 mm, and a 750 kVA pad mount transformer could be larger due to enclosure. Specific 750 kVA transformer dimensions vary based on cooling, insulation, and configuration.
A 750 kVA transformer weight depends on whether it’s dry-type or pad-mounted and the winding material. Copper-wound units are heavier. Average weights range between （Contact Us）.
If you’re working with site constraints, it’s essential to confirm the pad mounted transformer dimensions and lifting requirements ahead of time.
The 750 kVA transformer amps depend on the secondary voltage. For example:
At 480V: ~902 A
At 208V: ~2080 A
Use the formula:
Amps = (kVA × 1000) / (Voltage × √3)
This is also referred to as the 750 kVA transformer current rating or 750 kVA transformer secondary amps. Always verify the terminal size and cable spec when sizing for your load.
The cost of a 750 kVA transformer varies based on design, materials, enclosure, and compliance.
A dry type transformer tends to cost more than oil-filled but is safer for indoor use.
A typical 750 kVA transformer price ranges from （Contact Us）
For outdoor use, 750 kVA pad mounted transformer price may go higher
In Spanish-speaking markets, you’ll often see transformador 750 kVA, transformador de 750 kVA, or transformador 750 kVA precio used—prices vary by country
We also receive inquiries for transformador pad mounted 750 kVA for Latin American and African projects
To get a precise transformer 750 kVA price, send your voltage, application type, and delivery terms (FOB/CIF/DDP).