1000 kva 1 phase to 3 phase transformer
You’ve got single-phase power, but your equipment isn’t listening—it needs three. Pulling new lines? Not happening. Our 1000 kVA 1 phase to 3 phase transformer solves this fast. You keep your power source. We give you real 3-phase output—tested, reliable, and ready for full-time work.
This isn’t some converter box. We build dry-type, UL/CE-ready units that run heavy loads day in, day out. Motors, chillers, compressors—no problem. Whether you’re feeding it from a generator, an inverter, or limited grid, we size it to match. You tell us your voltage and space—we’ll make it fit.
Send your spec. We’ll get you the transformer that works.
Photovoltaics
A client in South America was setting up a ground-mounted solar system to power irrigation stations. The inverter output was single-phase, but the pumps—big three-phase units—wouldn’t even start.
He said: “We already got the permit for this design. Pulling new grid lines is off the table.”
We delivered a 1000 kVA dry-type transformer, 240V in, 400V three-phase out, with soft-start motor compatibility. Once installed, the pump started right up—clean and stable.
His voice message later: “We kept solar, didn’t touch the grid—and got everything running.”
Energy Storage
We worked with a microgrid integrator in the Philippines. Their system was battery plus PCS, outputting single-phase. They tried powering three-phase loads—cooling units, control cabinets—but they kept tripping.
The client said bluntly: “We don’t want to redesign anything. We just need it to run.”
We built them a 1000 kVA single phase to three phase dry-type transformer, Class H insulated, with an extended cooling path. Installed it right after the PCS. The day it went in, all cooling loads came online. No more PCS alarms.
He told us: “This was the only part we didn’t have to commission twice.”
Data Center
One of our U.S. clients was expanding an edge data center in a rural area. They had new UPS racks and cooling systems, but the utility only gave them single-phase power.
They said: “The gear’s already ordered. Power is now the holdup.”
We didn’t just quote a box—we reviewed cable paths and clearances, then built a 1000 kVA dry-type transformer, low-profile with front-access terminations. UPS and cooling both went live cleanly.
Their tech lead told us: “This was the most boring part of the install—and that’s a compliment.”
Wind-to-Hydrogen
A wind farm in Europe called us during a hydrogen pilot rollout. The turbine output was single-phase AC, and while the electrolyzer had its own feed, the supporting systems—pumps, PLCs, compressors—needed three-phase.
They asked: “Can we just add something downstream to power these without touching the stack?”
We supplied a 1000 kVA transformer, 240V single-phase input, 400V output, sealed IP54 with custom terminal layout. It ran the full two-month test cycle without a single fault.
Their lead engineer said: “It doesn’t look fancy, but it’s the reason our pumps even run.”
Healthcare
One general contractor on a hospital build in East Africa reached out. Their site had a single-phase diesel genset—reliable, but not enough to feed the new HVAC, surgical elevator, and sterilizers.
We didn’t sell specs—we asked how stable the generator was, then built a 1000 kVA dry-type transformer with thermal protection, mobile frame, and clear terminal labels.
Their in-house team installed it in a few hours.
What they told us: “This was the only part of the hospital power system that just worked—no rewiring, no rework.”
- Data Sheet
- Three Phase Transformer Catalog
- Shinenergy Product Catalog
Certification | UL |
Phase | Three Phase |
Rated capacity | UP TO 3000KVA Customized |
Frequency | 50/60Hz |
Work Efficiency | UP TO 99.05% |
Protection Class | IP00/IP20/IP23/IP40/IP44/IP54 |
Winding Material | Copper or Aluminum |
Insulation level | Class F (155°C) Class H (180°C) Class N (200°C) Class R (220°C) |
Designed lifetime | ≥30 years |
Cooling Method | Air Cooling |
Wiring Configuration | Δ-Y (Delta-Star)/Y-Y (Star-Star)/Δ-Δ (Delta-Delta)/Y-Δ (Star-Delta) /Δ-Z (Delta-Zigzag)/ Y-Z (Star-Zigzag) |
Noise | ≤35 dB (1 meter) |
Three Phase Transformer Catalog | |
500 kva 3 phase to single phase transformer | 225 kva single phase step up transformer |
500 kva single phase to 3 phase transformer | 200kva transformer single phase to 3 phase |
500 kva single phase to three phase transformer | 1000 kva 3 phase buck boost transformer |
1000 kva 1 phase to 3 phase transformer | 1000 kva three phase to single phase transformer |
750 kva transformer 3 phase boost transformer | 200kva 3 phase 208 to 480 transformer |
200kva 1 phase buck boost step up transformer | 167 kva 3 phase step up transformer 240 to 480 |
150 kva 480 3 phase to 120 single phase transformer | 100 kva 480v to 220v 3 phase transformer |
100 kva step up transformer 220 to 440 3 phase | 167 kva 3 phase step down transformer 240 to 208 |
167 kva 3 phase step up transformer 208 to 480 | 150 kva 3 phase transformers for sale |
100 kva step up transformer 220 to 440 3 phase | 100 kva step down transformer 480 to 240 3 phase |
Need 3-Phase Power? We’ll Build It from What You Have.
Not every site gets three-phase power. But that doesn’t mean you can’t run three-phase equipment. At Shinenergy, we build purpose-built solutions like the single phase to 3 phase transformer for systems that can’t afford grid delays or redesigns.
Whether you need a 240v single phase to 208v 3 phase transformer for telecom loads, or a 240 single phase to 480 3 phase step up transformer to support heavy-duty pumps—we’ve built it. We’ve also shipped 220v single phase to 3 phase transformer units to markets where 220V is standard.
Some clients choose a single to 3 phase transformer for full load operation. Others prefer a single phase to 3 phase transformer converter or even a 1 phase to 3 phase transformer converter that matches specific cabinet dimensions.
And yes, if you’re using single phase transformers to create 3 phase systems, we’ll help you design a clean, matched layout.
From solar farms to data centers, we’ve supported real-world setups needing a step up transformer single phase to 3 phase, or reverse builds like a step down transformer 3 phase to single phase for hybrid sites.
You don’t need three-phase on the line—you just need the right transformer between your load and supply.
📩 Tell us your voltage, load, and site conditions. We’ll size the best-fit unit—no guesswork, no hassle.
Yes. That’s exactly what a single phase to 3 phase transformer is designed for. Whether you’re powering chillers, motors, or control cabinets, we build solutions that give you stable, balanced 3-phase from a single-phase feed.
A single to 3 phase transformer is typically built for fixed voltages and continuous load, while a single phase to 3 phase converter transformer may also include dynamic balancing elements. We’ll help you pick based on your load type and duty cycle.
Absolutely. A 240v single phase to 208v 3 phase transformer is one of our most common builds. We’ve also done 220v single phase to 3 phase transformer units for agricultural or export installations.
Yes. If you’re trying to drive industrial equipment with high voltage demand, a 240 single phase to 480 3 phase step up transformer is what you want. We also offer a 240v single phase to 480v 3 phase step up transformer variant for grid-aligned setups.
Yes—we regularly build single phase to 3 phase step up transformer units. If you’re in a scenario where you both lack three-phase and need to raise voltage, we’ll size a combined solution that’s safe and code-compliant.
You can. We also supply step down transformer 3 phase to single phase models for retrofit zones, lighting panels, and mixed-use panels that only require single-phase downstream.
We’ve helped customers using single phase transformers to create 3 phase systems unify their setups, improve phase balancing, and reduce voltage mismatch. We’ll align to your wiring convention and help you clean up the layout.
Yes. Our 1 to 3 phase transformer builds are available in multiple mounting formats—wall, rack, cabinet—and we can customize terminal access. Ask about 1 phase to 3 phase transformer converter models built for modular panels.
We do. If you’re running an off-grid setup or inverter-only power, a transformer 1 phase to 3 phase unit helps isolate and stabilize output. We build these with thermal protection and load-smoothing features.
Yes. Our job is to convert single phase to 3 phase transformer style without touching your control panels or grid feed. Tell us your voltage, load, and how much room you’ve got—we’ll make it work.