Big Current AC Reactor
Shinenergy’s big current AC reactor is one type of AC reactor with a rated current of 1400A, rated current means it could handle the relative load, mainly applied for the commercial PV inverters of the power station.
- Made up of the silicone steel core and aluminum foil
- The common inductance is 20uH
- Big rating current
- CE, UL certificated
Big Rated Current
Shinenergy’s big current AC reactor with a rated current of 1400A. The current represents the size of the load. if the current is higher than the rated current, it is often because the load is too large. Of course, the machine will be damaged after a long time. If the rated current is large, it can load more powerful electrical appliances.
Big Common Inductance
Shinenergy’s big current AC reactor has a common inductance of 20uH, The value of the common inductance will directly affect the EMC performance. Its main function is to isolate the common-mode signal and attenuate external common-mode interference, thereby reducing the impact on the power supply. It can also attenuate the internal common mode signal and reduce the impact on the power grid. Large common inductance has a good suppression effect on low-frequency disturbance.
- Data sheet
- FAQs
| Model No. | MPR-020 |
| Application | PV Inverters |
| Core Material | Silicone steel core |
| Winding Material | Aluminum foil |
| Common Inductance | 20uH |
| Rated Inductance | 0.07mH |
| Frequency | 3.65KHZ |
| Weight | 340KG |
Q1: Why need to use the AC reactor?
A1: When a short circuit occurs in the power system, a large short-circuit current will be generated. It is very difficult to maintain the dynamic stability and thermal stability of electrical equipment if it is not restricted. Therefore, in order to meet the requirements of the breaking capacity of some circuit breakers, a reactor is often connected in series with the outgoing circuit breaker to increase the short-circuit impedance and limit the short-circuit current.
Q2: What’s the big current AC reactor?
A2: Shinenergy’s AC reactor, also called the AC reactor for power coordination. Its main function is to prevent harmonic interference in the power grid. It is required that its own distributed capacitance should be small, and its own resonance point should avoid the suppression frequency range, so as to reduce the interference voltage, but also ensure that the power frequency voltage drops below 2%, and the power consumption should be small.
Main Functions of Big Current AC Reactor
There are four main functions for Shinenergy’s big current AC reactor: 1. reduce mains harmonics, inrush, and peak currents; 2. Improve low-frequency conducted interference immunity; 3. Protection of the power electronics of the drive mechanism; 4. Improve power factor.